How tall should a table saw stand be

If you want to get satisfied with your DIY projects, you need to know the most crucial part of your project’s success: Always have the right arrangements of tools on hand.

Every tool makes the task much more straightforward and results in the best outputs. And the table saw stand is one of them. Its proper height ensures precise cuts quickly and efficiently. If the size is not right, you may end up with inappropriate cuts, or you may not even grab your blades correctly.

Are you getting confused about the length or how tall should a table saw stand be? Don’t worry! Scroll down to see the ins and outs to have the right height and width.

What Is The Table Saw Stand?

The table stand is the tool on which you store the table saw. It works as an auxiliary workstation and makes a considerable change in the overall performance of the saw. Though stands are one of the most critical parts to set up, it provides a workspace for different projects, which the power tool itself cannot provide for.

DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)
  • Table Saw Rolling Stand.
  • Table Saw Rolling Stand.
  • Table Saw Rolling Stand.

It provides an ideal height to cut woods that makes the woodwork easier and comfier and gives you more cutting capacity. Again, you can also use the stand as a storage place for your woodworking tools and other accessories while working. They can be portable or immobile according to their design.

How Tall Should A Table Saw Stand Be?

The ideal table saw stand height is 34 inches for people with 5 feet 9 inches tall on average. And the table saw is made according to its advantages. You will also find 31 inches to 38 inches table saw in the market, and you can choose the one you find comfortable and suits your height.

The stand’s height must suit your height as you have to curve your body a little for long day use in the workshop. If the height is too high, you cannot balance your body, leading to any threatening injuries.

Again, if it’s too short for you, it can cause you back pain after a long day of use. So choose the table saw according to your height and choice.

Another trick for determining table saw height is using the “thumb rule”. For this, stand straight, keeping your arms hanging relaxed at your sides, and count the height of your thumb joint from the floor.

This is exactly the height your saw stand should be. It will help you to control the shallowness of the blade easily for a perfect wood cutting.

How to Know What Size Table Saw Fits You?

The table saw size refers to its three dimensions; width, length, and height. As we mentioned earlier, the height can be determined by the thumbs rule.

On the other side, the table’s width and length depending on the type of cuttings that you’re going to make on it. Know the usual dimension of your projects and what size work area you need for your equipment.

So, if you are going to cut large sheets, buy a table saw with large table areas or come with an extension. However, using extensions is a good idea as they can be removed if you don’t need this.

If you are an average woodworker, a 33.5”×28.5” table saw with 34” height will work perfectly for you.

Where Should You Stand When Using A Table Saw?

Table saws can emerge as one of the most dangerous tools you can use if you don’t take proper safety precautions. Standing in the right position while operating a table saw – is very important to avoid kickback accidents and many more.

Best Position

The best place to stand when you’re cutting woods with the table saw is to the left behind the blade in a position that you find natural and comfortable. If you stand to the left, the blade will automatically get positioned between you and the fence. It also reduces the chance of injury by kicking back the material.

Standing In A Natural Spot

However, many right-handed people sometimes push the workpiece into the blade with their left hand. They think keeping the fence between them will protect them from any type of injury.

But if you’re not good at using your left hand, you can push the wood away from the fence and more into the blade and thus increase the chance of kickbacks. The same applies to left-handed people. So, stand in the place that you find the most natural.

Though the standing position makes the operation much safer for you, it is never the only thing you have to do to avoid kickbacks. So still, you can face kickbacks. For avoiding them, you should be aware of the other safety measures also. The best thing is to use the blade guard system and a push stick to feed the last bit through.

FAQs

How much lower should the outfeed table be?

If you don’t want to route the rail channels, make it 1/8” to ¼” lower than the bottom of the rail channels. But if you’re going to route the channels out for the rails, make it 1/8” to ¼” lower from the top of the saw table, and it’s the better thing to do.

What is the ideal depth for a workbench?

The perfect depth for your workbench should be no more extended than your arm can reach across it. In most cases, it is nearly 24”. But if you’re going to work with exceptionally large or wide wood pieces, the depth should be a few inches more. Adding 2 inches will work for most projects and pieces.

How to adjust workbench height?

Some workbenches come with adjustable height features that help to adjust the height according to the project you are using it for.

There are two jacks on the side body of those workbenches – an automotive jack and a motorcycle jack. The automotive jack is used to adjust the height. The only material you need to do this is a cordless drill. Run the drill into the jack, and it will go up and down.

How Wide Should My Table Saw Be?

The standard width is around 10 inches wide. It can be something larger. The ten inches dimension is ideal for mobile job sites to move around quickly.

Bottom Line

I guess I have resolved all your confusion on how tall should a table saw stand be. You can use several methods to get the right size for your frame. Whatever process you use, try to get one with maximum comfort to avoid any mishaps and eventually get good results.

Let me know in the comment section which method you are going to follow.

Happy sawing!