Best 10 Inch Table Saw Blade! The Ultimate Buyer Guide

Even though you purchase the best table saw out there, without getting the right blade it’s impossible to get the desired result. These blades can handle a huge variety of materials. So, you can use them for other purposes too.

That being said, there are both combination and specialized blades for different types of tasks such as ripping, crosscutting, and dado. In this article, I’m going to review the best of all kinds.

Read the full article to find the best 10 inch table saw blade for your cutting needs. For beginners, there’s a buyer’s guide at the end of this article to help you choose.

<strong>Take a quick look at my top picked 10 inch table saw blades:</strong>
  1. Freud D1080X Diablo 10″ – Best ATB for Crosscuts
  2. Freud 10″ x 24T – Best FTG for Heavy-Duty Ripping
  3. TOMAX 10-Inch 80 Tooth ATB – Best Budget
  4. DEWALT 10-Inch Miter / Table Saw Blades – Most Convenient Pack of 2
  5. IRWIN Tools Classic Series – Best for Trim and Finish Jobs
  6. Freud D1050X Diablo 10″ 50-tooth ATB – Best Combo Blade 
  7. Forrest WW10407125 Woodworker II – Best Combo Blade for Hardwood
  8. Freud – SD208 – Best Super Dado Set
  9. Oshlun SBNF-100100 – Great for Aluminum and Non-Ferrous Metals
  10. TWIN-TOWN 10-Inch Saw Blade – Best for General Purpose 

Best 10 Inch Table Saw Blade: My Review

Having a good blade in your saw is more important than you think. It can bring the best out of your table saw and improve the finishing of your work. Here are some fantastic 10 Inch Table Saw blades that earned user satisfaction.

1. Freud D1080X Diablo 10″ – Best ATB for Crosscuts

Look no further for the best cross-cutting tool because Freud is here with the finest ATB blade. Saving you more time and effort, most of the cuts require little to no sanding. I’ve picked this one as my top pick because of its ability to provide ultra-smooth finished work with remarkably chip-free clean results. Let’s see what more it has got to offer you.

This 10 inch Freud D1080X Diablo can be a great addition to your toolbox as it can handle a wide variety of materials. Throw anything at it like oak, pine, melamine, veneer plywood, delicate molding it will give you back an accurately cut workpiece. 

You can count on its longevity because Freud’s exclusive shock-resistant TiCo Hi-Density Carbide stays 4X longer than the standard one.

The thin 0.98-inch kerf between the blade’s 80 Hi-ATB laser cut teeth can provide ease of feed. So, enjoy cutting more while having smooth control over the blade’s position. 

What made it exceptional from the other products is its laser-cut stabilizer vent, which eliminates noise and vibration. Also, it fits nicely into a variety of table and miter saws, including the sliding miter, saw.

👍 Pros:
  • Precision cutting with narrow kerf
  • Noise and vibration-reducing vents
  • Shock-Resistant TiCo Hi-Density carbide 
  • Fits most of the table and miter saws
👎 Cons:
  • Requires test-cuts 

2. Freud 10″ x 24T – Best FTG for Heavy-Duty Ripping

Freud has more than 50 years of reputation for being the woodworking industry leader, so rest assured they know few things about carpentry tools. For heavy users, here’s another product from them. Thanks to its rigid blade body coated with non-stick Perma-Shield, reducing friction and excess heat buildup even after prolonged hours of usage.

This heavy-duty blade has 24 oversized flat-top teeth to carry out tough industrial ripping tasks without even setting up any stabilizers. For maintaining its long-term precision the tooth has got finishing tips made from Freud’s TiCo high-density carbide ripping blend. This blend matches the requirement for large-volume cutting applications. 

Along with improved density, impact resistance, rust protection, and heat resistance, you’re getting quiet and anti-kickback performance too. It earned the user’s satisfaction by mentioning that it feels like a hot knife through the butter!  

👍 Pros:
  • Chatter reducing
  • Anti-kickback design
  • Gigantic tooth with TiCo carbide blend finish
  • Lubricating Perma-SHIELD for smooth motor rotation
👎 Cons:
  • Some users had missing teeth issues

3. TOMAX 10-Inch 80 Tooth ATB – Best Budget

Having a tight budget shouldn’t stop you from getting the best 10-inch table saw blade for ripping. TOMAX ensures that this saw blade has all the brilliant features like the expensive ones. Not only wood and steel but also it produces great results in cutting non-iron alloys like aluminum, copper, etc. This versatile blade even cuts PVC plastic with smooth finishing.

Like the previously reviewed Freud products, this features laser-cut vibration eliminating technology for better control and zero sideways movements. For protecting against rust and corrosion, they’ve coated the saw blade with electrophoretic finishing. This treatment aids faster feed rates by reducing blade drag. 

Again, the manufacturers coated the tool with non-stick Perma-SHIELD to reduce gumming. As a result, there will be less downtime for blade cleaning and you can carry out your job faster. Overall, this is an outstanding blade, especially for the price that can give you crisp, splinter-free cuts every time.

👍 Pros:
  • Versatile blade 
  • Inexpensive price
  • Reduces gummy pitch buildup
  • Laser-cut anti-vibration technology
  • Electrophoretic coating for rust resistance
  • Backed up with a limited lifetime warranty
👎 Cons:
  • Loses edge quickly

4. DEWALT 10-Inch Miter / Table Saw Blades – Most Convenient Pack of 2

Coming from a reputed brand that has ruled over the cutting tool industry for quite a long time, you can’t go wrong with this combination pack. The reason behind calling it a combination pack is, here you’re getting two heavy-duty blades, each of them offering distinctive advantages. They perfectly fit into the miter saw and slide miter saw. You can carry out any job of cutting through softwood, hardwood, chipboard, or plywood. 

To maintain the true edge for long-lasting service life, the manufacturers have used tough tungsten carbide. This also gives them exceptional cutting performance. The plates are computer-balanced so you’ll be getting nothing but accuracy and better finishing.

But let me tell you the 60-tooth DW3106 isn’t fast like the other products I’ve reviewed here. However, if this is not an issue, consider getting this combo package for meeting all your cutting needs from ripping to crosscutting. The 30 tooth one is also a dependable saw blade for general purposes. 

👍 Pros:
  • High-quality 2-in-1 blades
  • Perfect tool for wood cutting jobs
  • Computer-balanced plate for precision
  • Ultra-thin kerf for fast and smooth slicing 
  • Long-lasting sharpness with tungsten carbide 
👎 Cons:
  • Not suitable for cutting through metal
  • Cuts slower compared to its alternatives

5. IRWIN Tools Classic Series – Best for Trim and Finish Jobs

Another powerful saw blade cuts a huge variety of materials including steel sheets. It does not burn through the metal and damages the paint as other metal cutting blades do. As there’s less friction, you can slice off them with zero heat buildup. Works perfectly with both table saw and miter saw without any chipping.

For extended durability, this blade is made from fully hardened heavy-gauge high carbon steel. It has a corrosion-resistant coating on it to prevent rusting. And there is an extremely thin kerf which means you’ll get fast and smooth cuts with minimal wastage.

Like the Freud ones, there’s no paint that can rub off and ruin your exclusive workpiece. So, you don’t need to make some test cuts before getting into the actual work. Users’ satisfaction with this product is also high and other things they’ve found IRWIN can handle are, vinyl fencing, acrylic, iron frame, etc.

👍 Pros:
  • Well-priced
  • Corrosion-resistant finishing
  • Ultra-thin kerf for smooth cuts 
  • Fully hardened plate offers longevity
  • Capable of cutting a wide range of materials
👎 Cons:
  • May get dull quickly

6. Freud D1050X Diablo 10″ 50-tooth ATB – Best Combo Blade 

For those who need a dependable cutting tool that can do an amazing job in both ripping and crosscutting, I’ve got just the right product for you. This one is from Freud’s Diablo series. While ripping this blade’s large gullet provides adequate space for chip removal. Again, with a high tooth count and closely-grouped tooth design, you can get clean and fine cross-cuts.

Like the other saw blades from Freud, this also features a super-thin kerf, helping to make fast and smooth cuts. And to guard it against heat, gumming, and corrosion it’s coated with non-stick Perma-SHIELD. If the chattering noise bothers you then lucky for you, it has got noise-reducing vents. It will also prevent kick-backs, and allow you to get better control over its position.

To stay sharp for a long time they’ve used TiCo hi-density carbide. Users sang praises of its durability too. If you need to do both ripping and cross-cuts, take this as the best 10-inch combination table saw blade. This truly versatile tool will save you the downtime of changing blades between tasks. 

👍 Pros:
  • Prevents gumming
  • Durable construction
  • Anti-kickback and noise-reducing vents
  • Great in both ripping and crosscutting jobs
  • Equally suitable for softwood and hardwood
👎 Cons:
  • You need to be patient with the feed rate

7. Forrest WW10407125 Woodworker II – Best Combo Blade for Hardwood

Another dependable all-purpose saw blade for both ripping and crosscutting for hardwood. Though it’s a bit more expensive than the other saw blades on the market, let me remind you, we’re dealing with high quality here. Because of its reverse teeth configuration, you’ll get cuts with a sand-free finish both on the top and bottom surfaces.

Each of them is virtually handmade. The superior C-4 carbide teeth with a hand-tensioned plate will guarantee you exceptionally precise cuts every time. It’s more long-lasting than every other product I’ve mentioned here. So, the higher price for the product is justified as you won’t be changing blades after a few uses. Moreover, the brand stands behind its blade by offering a lifetime sharpening service. This means they’ll return your blade having the exact tolerance and sharpness it had when it was new. 

So, if the quality is what matters to you more than the price, this is the best 10-inch table saw blade for hardwood. Don’t just believe me, you can check the review section of this product. Many of them have commented this is the best saw they’ve ever used.

👍 Pros:
  • Fastest and sharpest cutting tooth
  • Multiuse ripping and crosscutting 
  • Durable C-4 carbide construction
  • Offers lifetime re-sharpening and fixing 
👎 Cons:
  • Expensive than its alternatives in the market

8. Freud – SD208 – Best Super Dado Set

From veneered plywood and laminates to solid wood, throw anything at this versatile dado set it can make fantastic dados out of them. It has the flexibility of an adjustable dado to handle the undersized plywood you find nowadays in the market. Freud’s dado set can create fine edges, perfect 90◦ shoulders, and fantastic flat bottoms. It won’t be leaving any ridgelines for you to chisel or sand. 

Like the other saws from the same brand, it features the premium Ti-Co high-density carbide blend for exceptional cutting performance. This set includes 2 blades, 6 chippers, and a shim set for fine adjustments. Silver I.C.E. Coating prevents buildup on top of the surface and keeps it running cooler and cleaner.

Customers commented this dado set cuts beautiful dados. It comes at half the price of the Forrest one but gives the same result. However, let me tell you, almost all of them complained about the product packaging. 

Given the price, the case is made of very thin plastic. The tooth can hit each other and get damaged. So, be very careful while transporting it. I would strongly suggest you to make yourself a high-quality case or purchase one. Excusing the packaging, this is the best dado blade for a 10-inch table saw.

👍 Pros:
  • Adjustable up to 0.004” increments
  • Anti-kickback blades and chippers
  • Coat reduces friction and gumming
  • Makes perfect dados out of a wide variety of wooden material
👎 Cons:
  • Flimsy packaging 
  • Wrongly identified chipper blades

9. Oshlun SBNF-100100 – Great for Aluminum and Non-Ferrous Metals

Looking for the right blade to cut aluminum? You can’t go wrong with this blade from Oshlun which can also handle other non-ferrous metals such as copper, brass, and bronze. You can cut softwood and even some plastics like PVC and ABS. Just make sure to use butter, beeswax, or other sorts of lubricants like WD-40 when you’re making cuts on non-ferrous metals. 

With the precision ground micro grain tungsten carbide tips and a triple chip tooth configuration, clean burr-free is guaranteed. They’ve used professional-grade C-1 carbide, which stays sharp longer. On top of that, for reducing vibration and noise there are copper plugged expansion slots.

Users sang its praises by mentioning it even cuts heavy aluminum quickly and finely with a moderate feed rate. But you need to wear a protective eye mask and clamp the workpiece properly. Don’t use this for steel. 

👍 Pros:
  • Cuts quick and clean
  • Durable tungsten carbide
  • No noise or sideways movement 
  • Triple chip tooth configuration
👎 Cons:
  • A little expensive

10. TWIN-TOWN 10-Inch Saw Blade – Best for General Purpose 

Coming with an unexpectedly cheap price, many users hesitated to buy this in the first place. But those who tried were surprised by how well-made it is, considering the low price tag. Even it has totally out-cut Freud with far less edge chipping. So, I would say for finish carpenters and woodworking hobbyists it can be a go-to tool as it gives fine, crisp, and precise cuts. 

Equally suitable for ripping and crosscutting through softwood, hardwood, chipboard, and plywood. So, it’s the best general-purpose 10-inch table saw blade in the budget. They’ve used construction-grade C4 tungsten carbide teeth, so life expectancy increases 3times than the regular blades. You can use it on circular saws, miter saws, and table saws.

Like the premium saw blades, this features a 1.8mm thin kerf design for fast cut and smooth cutting action. This allows for minimal material waste which is definitely a plus. To keep it cool and reduce blade warp, there are laser-cut stabilizer vents to trap noise and vibration.

👍 Pros:
  • Budget-friendly price
  • Utmost accuracy and smoothness
  • Allows both ripping and crosscutting
  • Vents for noise and vibration reduction
  • 3X longer life with C4 tungsten carbide teeth
👎 Cons:
  • No non-slip surface coat

What to Consider Before Buying the Best 10 Inch Table Saw Blade?

Are you buying a saw blade for the first time? Or, are you looking for a specialized one to make an upgrade? No matter what is the cause of purchase check these things down below so that you don’t miss an important factor. Because the last thing we want is you ending up with the wrong blade for your 10” table saw.

Intended Usage

For DIY projects a dependable combination blade will meet almost all the major cutting needs. It’s equally suitable for both ripping and crosscutting actions on a wide variety of wooden materials. Also, it can save you the cost of purchasing multiple blades. On top of that, you can work faster as you don’t have to change blades between different tasks.

But if your works require ripping mostly, consider getting a specialized blade for that. It will save you both time and effort. Ripping blades are suitable for slicing through hardwood as they’re made for tougher materials. 

Crosscuts need more precision so specialized blades that offer cleaner edges. You can use them for fine carpentry works too. On the other hand, the dado blades are for furniture, shelving, and door panel where grooves are required.

Build Material

The material of the blade plays an important role in its durability. Usually, the tungsten C-4 carbide offers a longer life expectancy. You can also count on Freud’s exclusive TiCo Hi-Density carbide. It will stay sharp 4 times longer than the regular one. The high-quality material adds up to the cost, but it will make up for that by giving you sharp cuts without needing to change the blades.


Kerf means the thickness of the blade. The thicker the kerf more materials will be removed with every cut. Besides, they need more power to cut through. So, all the premium blades offer ultra-thin kerf to reduce wastage, power requirement, and utmost accuracy. 

Teeth Configuration

Flat top teeth blade is more appropriate for ripping. They leave rough edges as they rip out the material in large chunks. ATB blades feature teeth configuration in the alternate direction for finer finishing. Combination blades have a mixed approach both of them to carrying out ripping and crosscutting jobs.

Anti-kickback Vents

This is another important feature to get more control over the blade because there will be less sideways movement. On top of that, you’ll be getting a quieter and more peaceful environment to work in. That being said, Freud’s blades run the quietest.

Final Words

While the combination blade can serve your general purpose and your money and time, the specialized one will help to achieve the desired outcome. Each of them has its unique applications and benefits. So, decide on which one you need. I’ve tried to review the best blades of every kind. Get the one that fits your use case and never regret it.